Description: Purpose   Managing declining nutrient use efficiency in crop production has been a global priority to maintain high agricultural productivity with finite non-renewable nutrient resources, in particular phosphorus (P). Rapid spectroscopic methods increase measurement density of soil nutrients and improve the accuracy of rates of additional P inputs. Materials and methods   Soil P was measured by a multi-element energy-dispersive X-ray fluorescence spectroscopic (XRFS) method to estimate the spatial distribution of soil total (XRFS-P) and bioavailable P in a Fluvisol occurring on a 20-ha contiguous area comprised of seven elongated field strips under a wheat–maize rotation near the Quzhou Agricultural Experiment Station in the North China Plain. Results and discussion   Soil XRFS-P was highly variable along the length of the field strips and across the entire area after decades of continuous cultivation. A linear relationship existed between XRFS-P and bicarbonate-extractable P or Mehlich 3-extractable P, allowing a description of the spatial distribution of bioavailable P based on XRFS, in both directions of a two-dimensional grid covering the entire area ( p  〈 0.05). Distinct management zones were identified for more precise placement of additional P. Conclusions   Direct element-specific analysis and a high sample throughput make XRFS an indispensable component of a new approach to sustainably manage P, and other macronutrients of low atomic number Z such as K, Ca, or Cl in production fields, based on their site-specific variations in the soil. Concerning P, this rapid precision approach provides a promising avenue to manage soil P as a regionalized variable while preventing zones of deficiency or surplus P that can affect plant productivity or potential loss from a field, respectively. Content Type Journal Article Pages 1-12 DOI 10.1007/s11368-011-0347-2 Authors Thanh H. Dao, USDA-ARS Environmental Management and ByProducts Utilization Laboratory, BARC-East Bldg. 306, Beltsville, MD 20705, USA Yuxin X. Miao, College of Resources and Environmental Science, China Agricultural University, Beijing, People’s Republic of China Fusuo S. Zhang, College of Resources and Environmental Science, China Agricultural University, Beijing, People’s Republic of China Journal Journal of Soils and Sediments Online ISSN 1614-7480 Print ISSN 1439-0108

Description: SummaryThe aim of this study was to identify scientific criteria and to acquire performance data for the development of mariculture in the context of sustainable multifunctional use of offshore space and natural resources.In connection with current plans for a massive expansion of wind farms in offshore areas of the North Sea, the idea emerged to combine these with the installation of extensive mariculture for bivalves and macroalgae. Since offshore wind farms provide safety from shipping and infrastructure for attachment and service support, the opportunity for a multiple-use concept presented itself. However, prior to such a multifunctional development, it is necessary to determine the appropriate biological, technological and management requirements as well as the performance characteristics that would allow the employment of favourable and cost-effective methodologies. To this end, spezial focus was placed on the combination of extensive offshore shellfish and seaweed farming at exposed sites within the proposed offshore wind farms.This thesis deals in detail with1. the effects of abiotic and biotic factors on the growth potential of indigenous macroalgae and bivalves in extensive mariculture systems exposed to the stressful conditions of offshore habitats: (a) effects of physical forces on the cultivated species, (b) various parameters characterising the growth performance of species, (c) testing these parameters while using a variety of substrates and technical setups, (d) survival and health conditions, (e) recruitment, (f) parasite infestation of mussels in relation to inshore and offshore exposure, and (g) site-specific responses of the species to the various harsh offshore environments,2. the interaction between physical offshore processes and man-made structures in areas of the German North Sea Territory where mariculture has potential,3. the conditions for possible combination of mariculture systems with offshore wind farms in terms of the legal framework and possible management strategies, and4. the socio-economic and legal consequences and interactions for offshore mussel farming with the existing conventional inshore bottom culture activities.The research locations were specifically selected sites in the offshore region of the German Bight, mainly in the outer estuary of the River Weser, the offshore waters off the Island of Helgoland, several offshore areas where wind farms are planned, and habitats along the northern part of the Island of Sylt.In this yet relatively young research field the performance of different offshore culture systems with attached macroalgae (Laminaria saccharina) and blue mussels (Mytilus edulis) was assessed at monthly sampling intervals. These procedures were carried out using research vessels, boats and scuba surveys, while determining morphometric parameters (e.g. length, width, thickness) as well as weight for growth analysis of mussels and seaweeds. Furthermore, the condition index, the meat content and the degree of parasite infestation of blue mussels were determined. The abundance of mussel larvae in the water column and the resulting settlement success of post-larvae on various spat collectors were investigated. Seaweed studies included attachment strength, breaking and drag forces on kelp sporophytes in order to describe the resistance of cultivated Laminarians to high energy environments. Additional assessment criteria were biochemical parameters (e.g. chlorophyll-, nutrient-, POC- and TON-concentrations and their ratios) to describe the food availability for mussels and the nutrient composition for algal growth as well as oceanographic parameters (currents, waves, swell, salinity, temperature, light attenuation) to describe the wave climate and current velocities of the study sites in the offshore environment. Technical studies comprised two system designs (longline, ring structure) of various set ups (submerged or floating mode) in different locations (offshore or inshore) to find an appropriate culture design to sustain growth and survival of cultivated species. Further, a specially designed offshore spat collector was used for settlement investigations of mussel post larvae. Some fundamental studies were carried out in order to pave the way for the realisation of open ocean aquaculture in offshore wind farms (e.g. multifunctional use of offshore habitats in terms of avoidance of stakeholder conflicts, the legal framework for such activities in coastal areas and in the Exclusive Economic Zone (EEZ), the multi-use concept in terms of integrated coastal zone management).Laminaria saccharina showed sufficient length increments in offshore habitats growing on a submerged ring system. It could be demonstrated by drag and breaking-/dislodgement force experiments that algae were capable of resisting the high-energy environment of the North Sea. The concentration of mussel larvae in the water column decreased offshore and resulted in a low settlement success while at the same time infestation load decreased and was lacking at offshore suspended collectors. The three system designs showed different results. While the offshore ring proved to be superior for seaweed cultivation under the harsh conditions, the longline showed some major drawbacks in terms of materials used, design and installation modes (submerged or floating). The spat collector largely withstood the harsh hydrodynamic conditions of the North Sea. The hitherto fragmented legal framework for the offshore waters was found to be one of the key constraints for the successful implementation of multifunctional use schemes. However, participation of all involved stakeholders may provide a window of opportunity to turn the existing lack of offshore regulations into a positive momentum, as scope exists to move with the development of new offshore co-management concepts beyond existing management approaches.Whether such offshore installations would provide sufficient economic returns could not be answered yet, as experience on the maintenance of offshore wind farms is lacking so far.However, the discovery that Laminaria saccharina resists offshore forces and shows sufficient length increments and mussels growing in offshore habitats are not affected by parasites may provide a key incentive for positive commercial use.It thus can be shown that there is a high potential for farming the deep blue in the German EEZ, provided that some of the constraints, of which the lack of legal framework and technical aspects seems to be most severe, are resolved in the near future.

Description: Based on the European Waste Framework Directive and the German Recycling Management Act of 01.06.2012 the objectives for a national waste prevention programme were defined. As main objective, according to art. 1 WFD, the "prevention or reduction of the disadvantageous impacts of waste generation and management on the human health and the environment" is recommended. Indicators for a quantitative and qualitative monitoring are derived for both, the individual measures as well as for a waste prevention programme.

Description: Purpose   At present, many urban areas in Mediterranean climates are coping with water scarcity, facing a growing water demand and a limited conventional water supply. Urban design and planning has so far largely neglected the benefits of rainwater harvesting (RWH) in the context of a sustainable management of this resource. Therefore, the purpose of this study was to identify the most environmentally friendly strategy for rainwater utilization in Mediterranean urban environments of different densities. Materials and methods   The RWH systems modeled integrate the necessary infrastructures for harvesting and using rainwater in newly constructed residential areas. Eight scenarios were defined in terms of diffuse (D) and compact (C) urban models and the tank locations ((1) underground tank, (2) below-roof tank, (3) distributed-over-roof tank, and (4) block tank). The structural and hydraulic sizing of the catchment, storage, and distribution subsystems was taken into account using an average Mediterranean rainfall, the area of the harvesting surfaces, and a constant water demand for laundry. The quantification of environmental impacts was performed through a life cycle assessment, using CML 2001 Baseline method. The necessary materials and processes were considered in each scenario according to the lifecycle stages (i.e., materials, construction, transportation, use, and deconstruction) and subsystems. Results and discussion   The environmental characterization indicated that the best scenario in both urban models is the distributed-over-roof tank (D3, C3), which provided a reduction in impacts compared to the worst scenario of up to 73% in diffuse models and even higher in compact ones, 92% in the most dramatic case. The lower impacts are related to the better distribution of tank weight on the building, reducing the reinforcement requirements, and enabling energy savings. The storage subsystem and the materials stage contributed most significantly to the impacts in both urban models. In the compact density model, the underground-tank scenario (C1) presented the largest impacts in most categories due to its higher energy consumption. Additionally, more favorable environmental results were observed in compact densities than in diffuse ones for the Global Warming Potential category along with higher water efficiencies. Conclusions   The implementation of one particular RWH scenario over another is not irrelevant in drought-stress environments. Selecting the most favorable scenario in the development of newly constructed residential areas provides significant savings in CO 2 emissions in comparison with retrofit strategies. Therefore, urban planning should consider the design of RWH infrastructures using environmental criteria in addition to economic, social, and technological factors, adjusting the design to the potential uses for which the rainwater is intended. Recommendations and perspectives   Additional research is needed to quantify the energy savings associated with the insulation caused by using the tank distributed over the roof. The integration of the economic and social aspects of these infrastructures in the analysis, from a life cycle approach, is necessary for targeting the planning and design of more sustainable cities in an integrated way. Content Type Journal Article Category WATER USE IN LCA Pages 1-18 DOI 10.1007/s11367-011-0330-6 Authors Sara Angrill, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Ramon Farreny, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Carles M. Gasol, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Xavier Gabarrell, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Bernat Viñolas, Department of Geotechnical Engineering and Geosciences, School of Civil Engineering (ETSECCPB), Technical University of Catalonia—Barcelona Tech (UPC), Campus Nord, C/ Jordi Girona 1-3, Building D2, 08034 Barcelona, Catalonia, Spain Alejandro Josa, Department of Geotechnical Engineering and Geosciences, School of Civil Engineering (ETSECCPB), Technical University of Catalonia—Barcelona Tech (UPC), Campus Nord, C/ Jordi Girona 1-3, Building D2, 08034 Barcelona, Catalonia, Spain Joan Rieradevall, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Journal The International Journal of Life Cycle Assessment Online ISSN 1614-7502 Print ISSN 0948-3349

Description: Dimethyl sulphide (DMS) and carbon monoxide (CO) are climate-relevant trace gases that play key roles in the radiative budget of the Arctic atmosphere. Under global warming, Arctic sea ice retreats at an unprecedented rate, altering light penetration and biological communities, and potentially affect DMS and CO cycling in the Arctic Ocean. This could have socio-economic implications in and beyond the Arctic region. However, little is known about CO production pathways and emissions in this region and the future development of DMS and CO cycling. Here we summarize the current understanding and assess potential future changes of DMS and CO cycling in relation to changes in sea ice coverage, light penetration, bacterial and microalgal communities, pH and physical properties. We suggest that production of DMS and CO might increase with ice melting, increasing light availability and shifting phytoplankton community. Among others, policy measures should facilitate large-scale process studies, coordinated long term observations and modelling efforts to improve our current understanding of the cycling and emissions of DMS and CO in the Arctic Ocean and of global consequences.

Description: The research project seeks to identify the CDM SD tool's possible shortcomings, and to make structured recommendations on how to improve the EB's SD tool. Findings from this project are meant to have a lighthouse effect on the development of provisions on Sustainable Development within other carbon mechanisms of the UNFCCC and beyond. This report represents the consolidated findings of three work packages within this research project. The first chapter provides some background on the subject at hand, and leads into the report. The following chapter covers the assessment and comparison of the SD provisions of selected flexible mechanisms and multilateral standards.