Description: The study investigates the in-situ strength of sediments across a plate boundary décollement using drilling parameters recorded when a 1180-m-deep borehole was established during International Ocean Discovery Program (IODP)Expedition 370, Temperature-Limit of the Deep Biosphere off Muroto (T-Limit). Information of the in-situ strength of the shallow portion in/around a plate boundary fault zone is critical for understanding the development of accretionary prisms and of the décollement itself. Studies using seismic reflection surveys and scientific ocean drillings have recently revealed the existence of high pore pressure zones around frontal accretionary prisms, which may reduce the effective strength of the sediments. A direct measurement of in-situ strength by experiments, however, has not been executed due to the difficulty in estimating in-situ stress conditions. In this study, we derived a depth profile for the in-situ strength of a frontal accretionary prism across a décollement from drilling parameters using the recently established equivalent strength (EST) method. At site C0023, the toe of the accretionary prism area off Cape Muroto, Japan, the EST gradually increases with depth but undergoes a sudden change at ~ 800 mbsf, corresponding to the top of the subducting sediment. At this depth, directly below the décollement zone, the EST decreases from ~ 10 to 2 MPa, with a change in the baseline. This mechanically weak zone in the subducting sediments extends over 250 m (~ 800–1050 mbsf), corresponding to the zone where the fluid influx was discovered, and high-fluid pressure was suggested by previous seismic imaging observations. Although the origin of the fluids or absolute values of the strength remain unclear, our investigations support previous studies suggesting that elevated pore pressure beneath the décollement weakens the subducting sediments.

Description: Microorganisms in marine subsurface sediments substantially contribute to global biomass.Sediments warmer than 40°C account for roughly half the marine sediment volume, but theprocesses mediated by microbial populations in these hard-to-access environments are poorlyunderstood. We investigated microbial life in up to 1.2-kilometer-deep and up to 120°C hotsediments in the Nankai Trough subduction zone. Above 45°C, concentrations of vegetativecells drop two orders of magnitude and endospores become more than 6000 times more abundantthan vegetative cells. Methane is biologically produced and oxidized until sediments reach 80°to 85°C. In 100° to 120°C sediments, isotopic evidence and increased cell concentrationsdemonstrate the activity of acetate-degrading hyperthermophiles. Above 45°C, populated zonesalternate with zones up to 192 meters thick where microbes were undetectable

Description: International Ocean Discovery Program (IODP) Expedition 370 aimed to explore the limits of life in the deep subseafloor biosphere at a location where temperature increases with depth at an intermediate rate and exceeds the known temperature maximum of microbial life (~120°C) at the sediment/basement interface ~1.2 km below the seafloor. Drilling Site C0023 is located in the vicinity of Ocean Drilling Program (ODP) Sites 808 and 1174 at the protothrust zone in the Nankai Trough off Cape Muroto at a water depth of 4776 m. ODP Leg 190 in 2000, revealed the presence of microbial cells at Site 1174 to a depth of ~600 meters below seafloor (mbsf), which corresponds to an estimated temperature of ~70°C, and reliably identified a single zone of higher cell concentrations just above the décollement at around 800 mbsf, where temperature presumably reached 90°C; no cell count data was reported for other sediment layers in the 70°–120°C range, because the limit of manual cell count for low-biomass samples was not high enough. With the establishment of Site C0023, we aimed to detect and investigate the presence or absence of life and biological processes at the biotic–abiotic transition with unprecedented analytical sensitivity and precision. Expedition 370 was the first expedition dedicated to subseafloor microbiology that achieved time-critical processing and analyses of deep biosphere samples by simultaneous shipboard and shore-based investigations. Our primary objectives during Expedition 370 were to study the relationship between the deep subseafloor biosphere and temperature. We aimed to comprehensively study the factors that control biomass, activity, and diversity of microbial communities in a subseafloor environment where temperatures increase from ~2°C at the seafloor to ~120°C at the sediment/basement interface and thus likely encompasses the biotic–abiotic transition zone. We also aimed to determine geochemical, geophysical, and hydrogeological characteristics in sediment and the underlying basaltic basement and elucidate if the supply of fluids containing thermogenic and/or geogenic nutrient and energy substrates may support subseafloor microbial communities in the Nankai accretionary complex. To address these primary scientific objectives and questions, we penetrated 1180 m and recovered 112 cores across the sediment/basalt interface. More than 13,000 samples were collected, and selected samples were transferred to the Kochi Core Center by helicopter for simultaneous microbiological sampling and analysis in laboratories with a super-clean environment. Following the coring operations, a temperature observatory with 13 thermistor sensors was installed in the borehole to 863 mbsf.

Description: X-ray computed tomography (XCT) can be used to identify lithologies and deformation structures within geological core, with the potential for the identification processes to be applied automatically. However, because of drilling disturbance and other artifacts, the use of large XCT-datasets in automated processes requires methods of quality control that can be applied systematically. We propose a new systematic method for quality control of XCT data that applies numerical measures to CT slices, and from this obtains data reflective of core quality. Because the measures are numerical they can be applied quickly and consistently between different sections and cores. This quality control processing protocol produces downhole radiodensity profiles from mean CT-values that can be used for geological interpretation. The application of this quality control protocols was applied to XCT data from International Ocean Discovery Program (IODP) Expedition 370 Site C0023 located at the toe of the Nankai accretionary complex. The evaluation of core quality based on this protocol was found to be a good fit to standard-evaluations based on the visual description of core, and could be used to select samples free from drilling disturbance or contamination. The quality-controlled downhole mean CT-value profile has features that can be used to identify lithologies within a formation, the presence and type of deformation structures and to distinguish formations.

Description: Biogeochemical processes in subseafloor sediments can notably change over geological timescales due to variations in oceanographic, climatic and/or depositional conditions. To improve the understanding of changing biogeochemical processes on longer timescales, we investigated ~1.2 km deep and up to 120°C hot subseafloor sediments from the Nankai Trough offshore Japan (Site C0023), drilled during International Ocean Discovery Program Expedition 370 (Temperature Limit of the Deep Biosphere off Muroto)1. Over the past 15 Ma, the sediments have moved several hundreds of kilometers from the Shikoku Basin to the Nankai Trough due to tectonic motion of the Philippine Sea plate2. During this migration, the depositional, geochemical and thermal conditions have significantly changed. By combining geochemical data, sedimentation rates and reactive transport modeling, we reconstructed the evolution of biogeochemical processes in sediments at Site C0023. A distinctive feature at Site C0023 is an inverse sulfate-methane transition (SMT) at ~730 m depth with a broad sulfate-methane overlap zone of ~100 m, suggesting inefficient anaerobic oxidation of methane (AOM). This depth interval corresponds to a temperature of 80° to 85°C, which coincides with the known temperature limit of AOM-performing microbial communities3,4. Our model results demonstrate that the inverse SMT was formed at ~2.5 Ma after the onset of biogenic methanogenesis and AOM as a consequence of enhanced organic carbon burial. Depth-integrated AOM rates derived from the model markedly decrease since the beginning of trench-style deposition and the associated rapid heating of the sediments at ~0.4 Ma, indicating that the microbial activity of AOM-performing communities at the inverse SMT has already started to cease and the SMT is about to disappear. This successive fading of the SMT and, thus, a decrease in the efficiency of the microbial methane sink is ultimately related to the temperature increase beyond the threshold of being suitable for AOM-performing microbial communities. 1Heuer et al., (2017), In Proc. IODP Volume 370. 2Mahony et al., (2011), GSA Bulletin 123, 2201-2223. 3Holler et al., (2011), ISME J 5, 1946-1956. 4Biddle et al., (2012), ISME J 6, 1018-1031.

Description: Microbial life inhabits deeply buried marine sediments, but the extent of this vast ecosystem remains poorly constrained. Here we provide evidence for the existence of microbial communities in ~40° to 60°C sediment associated with lignite coal beds at ~1.5 to 2.5 km below the seafloor in the Pacific Ocean off Japan. Microbial methanogenesis was indicated by the isotopic compositions of methane and carbon dioxide, biomarkers, cultivation data, and gas compositions. Concentrations of indigenous microbial cells below 1.5 km ranged from 〈10 to ~10**4 cells cm**-3. Peak concentrations occurred in lignite layers, where communities differed markedly from shallower subseafloor communities and instead resembled organotrophic communities in forest soils. This suggests that terrigenous sediments retain indigenous community members tens of millions of years after burial in the seabed.