ISSN:
1611-8227
Keywords:
Key words Asbestos
;
Health risk
;
Energy consumption
;
Life cycle assessment
;
Pulse–flux problem
Source:
Springer Online Journal Archives 1860-2000
Topics:
Energy, Environment Protection, Nuclear Power Engineering
Notes:
Abstract This study evaluated the environmental impacts of sprayed-on asbestos, which had been used as insulation material in buildings, from multiple perspectives, mainly at the disposal stage. The health risks from asbestos emission and energy consumption were estimated. Two disposal scenarios were assumed for the asbestos: melting for reduced-risk disposal and ordinary packaging/landfilling. We estimated the asbestos emission and health risk in the case of packaging/landfilling, assuming uncontrolled management of the landfill site. A difficulty with introducing health-risk concepts into life cycle assessment (LCA) is the pulse–flux problem, which is discussed in the light of these estimations. In order to solve this problem, we proposed a method using a conversion factor representing exposure-dose/emission, and showed that emission could be converted into health risk. We also estimated the energy consumption for melting asbestos in the disposal stage, which can decrease the health risk. If we consider the energy consumption for the life cycle of asbestos, only a little energy is required for melting, compared with the large amount of energy saved in the use stage owing to the insulating effect of the asbestos. The trade-off relationship between health risk and energy consumption for the disposal scenarios indicated the need for weighting methods to handle trade-offs such as this.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s10163-999-0020-7
Permalink
